Replace a user-serviceable tail-light bulb
更换可维修式尾灯灯泡
For manual-approved filament bulbs only, with seal and function checks.
仅适用于手册允许的普通灯泡，并包含密封与功能复查。
Beginner · 15–25 min · Exact bulb, trim tool if approved
1. Confirm bulb and access
Read the manual for the exact bulb number and access panel. Stop if the lamp is sealed LED or requires body-panel removal.
确认灯泡与入口
按手册确认准确灯泡编号和检修口；密封 LED 或需要拆车身件时停止。
2. Isolate and photograph
Ignition and lights off, key removed. Photograph connector orientation, clips and the old bulb before release.
断电并拍照记录
关闭点火与灯光并取走钥匙，拆前拍下插头方向、卡扣和旧灯泡。
3. Fit without forcing
Remove by the manual method, inspect the seal and fit the exact replacement. Do not bend contacts or touch halogen-type glass.
无暴力安装
按手册拆卸，检查密封并装入准确替代件；不要弯折触点或触摸卤素玻璃。
4. Test all functions and leaks
Test tail, brake and indicator functions as applicable. Refit the panel and check that the lens sits dry and evenly sealed.
测试功能与密封
按适用功能测试尾灯、刹车灯和转向灯，复原饰板并确认灯罩干燥、密封均匀。